Congrats to 1lowcut!

mr64magic · 02-07-2008, 04:02 PM

Yo cut first of all congrats on being the UR feature ride!

http://www.unitedridaz.org/index.php?do=feature

and on the trip to Denver. Word from the fam in Utah is 80 can get nasty so your other route south might be a little better option. These might help ya plan it as time gets closer.

Safe Travel USA

Wyoming Road Report Map

Utah Commuter Link

Real-Time Road & Weather Conditions

Keep an eye on these. The highway patrol updates them regularly.

pcp · 02-07-2008, 04:17 PM

nice

. congrats

1lowcut · 02-07-2008, 04:28 PM

Cool! I didn’t know I was featured.

Thanks to all for your help and tips along the way. Special thanks to Slam for all his help with the project. The motor was allot of work but it was fun.

SLAMMED63CHEVY · 02-07-2008, 05:18 PM

Congrats

that cutty is one of my favorites, I'm here to help. It's always more fun when you have a buddy to pick up my tools.

pcp · 02-07-2008, 09:06 PM

Quote:

Originally Posted by SLAMMED63CHEVY

Congrats

that cutty is one of my favorites, I'm here to help. It's always more fun when you have a buddy to pick up my tools.

hahaLOL

1lowcut · 02-08-2008, 08:59 AM

Quote:

Originally Posted by SLAMMED63CHEVY

Congrats

that cutty is one of my favorites, I'm here to help. It's always more fun when you have a buddy to pick up my tools.

Sorry Slam but i"m gonna put you out right here.

How are you guys with your tools while your working on a project? Me, i have to have my tools back where they belong so the next time i come across a 9/16 bolt (and i will) I know where the hell the socket is. When we did the motor i know slam is bad with his tools, he tosses them aside and then spends 5 minutes looking for where he put a socket last time he had it. Knowing this i brought over two tool boxes one for him and one for me so i could find my shit when i needed it. Plan didnt work, this guys messed up his box and mine and neither of us could find what we needed. Not mad at him, we had a few good jokes about it and passed some time giving him crap about it.

What about you guys? Messy or neat in the shop?

mr64magic · 02-08-2008, 09:43 AM

Lowcut, I'd be worried if Slam was wearing overalls with alot of pockets. He'll get half way down the drive way on his way home, and wrenches start falling outta his pockets. So is true your installing cameras in your garage so when slam comes over to work and you can watch play back and instant replay as to where he set his wrench down 5 minutes ago?

The shop here I try to keep it under control. My brother in law has tools all over hell.

At home my brother keep his stuff together, but he uses my dads and doesn't give a shit. When your in the heat of project you just gotta git r dun.

Things are better there now, we don't demolition derby like we used to so there is alot less mess.

SLAMMED63CHEVY · 02-08-2008, 11:36 AM

Quote:

Originally Posted by 1lowcut

Sorry Slam but i"m gonna put you out right here.

How are you guys with your tools while your working on a project? Me, i have to have my tools back where they belong so the next time i come across a 9/16 bolt (and i will) I know where the hell the socket is. When we did the motor i know slam is bad with his tools, he tosses them aside and then spends 5 minutes looking for where he put a socket last time he had it. Knowing this i brought over two tool boxes one for him and one for me so i could find my shit when i needed it. Plan didnt work, this guys messed up his box and mine and neither of us could find what we needed. Not mad at him, we had a few good jokes about it and passed some time giving him crap about it.

What about you guys? Messy or neat in the shop?

I found one of your tools the other day when you where showing me your car... and where was it... in your bumper making all kinds of racket, I know you will blame it on the guys that painted you car, but I have work with you so I find it a little hard to believe

Yes, 1low is right I can put down a tool and as soon as it hits the ground it will disappear, no joke... and I will spend 5-min looking for it, but I have never lost a tool.

1lowcut · 02-08-2008, 11:59 AM

We have not concluded that it is a wrench or socket in the bumper yet! Could be a nut I forgot to tighten.

SLAMMED63CHEVY · 02-08-2008, 01:56 PM

Quote:

Originally Posted by 1lowcut

We have not concluded that it is a wrench or socket in the bumper yet! Could be a nut I forgot to tighten.

LOL....good one

you need to get that out, it make alot of racket.

02-07-2008, 04:02 PM	#1 (permalink)
mr64magic Moderator! UnitedRidaZ Idaho Join Date: Aug 2005 Location: Caldwell Barrio Posts: 764	Congrats to 1lowcut! Yo cut first of all congrats on being the UR feature ride! http://www.unitedridaz.org/index.php?do=feature and on the trip to Denver. Word from the fam in Utah is 80 can get nasty so your other route south might be a little better option. These might help ya plan it as time gets closer. Safe Travel USA Wyoming Road Report Map Utah Commuter Link Real-Time Road & Weather Conditions Keep an eye on these. The highway patrol updates them regularly. Last edited by mr64magic; 02-07-2008 at 04:04 PM.

02-07-2008, 04:17 PM	#2 (permalink)
pcp Registered User Join Date: Jan 2007 Posts: 237	Re: Congrats to 1lowcut! nice . congrats

02-07-2008, 04:28 PM	#3 (permalink)
1lowcut AIR RIDE MODERATOR Join Date: Apr 2007 Location: Reno Posts: 703	Re: Congrats to 1lowcut! Cool! I didn’t know I was featured. Thanks to all for your help and tips along the way. Special thanks to Slam for all his help with the project. The motor was allot of work but it was fun.

02-07-2008, 05:18 PM	#4 (permalink)
SLAMMED63CHEVY AIR RIDE MODERATOR Join Date: Apr 2007 Location: Reno, NV Posts: 1,230	Re: Congrats to 1lowcut! Congrats that cutty is one of my favorites, I'm here to help. It's always more fun when you have a buddy to pick up my tools.

02-08-2008, 09:43 AM	#7 (permalink)
mr64magic Moderator! UnitedRidaZ Idaho Join Date: Aug 2005 Location: Caldwell Barrio Posts: 764	Re: Congrats to 1lowcut! Lowcut, I'd be worried if Slam was wearing overalls with alot of pockets. He'll get half way down the drive way on his way home, and wrenches start falling outta his pockets. So is true your installing cameras in your garage so when slam comes over to work and you can watch play back and instant replay as to where he set his wrench down 5 minutes ago? The shop here I try to keep it under control. My brother in law has tools all over hell. At home my brother keep his stuff together, but he uses my dads and doesn't give a shit. When your in the heat of project you just gotta git r dun. Things are better there now, we don't demolition derby like we used to so there is alot less mess.

02-08-2008, 11:59 AM	#9 (permalink)
1lowcut AIR RIDE MODERATOR Join Date: Apr 2007 Location: Reno Posts: 703	Re: Congrats to 1lowcut! We have not concluded that it is a wrench or socket in the bumper yet! Could be a nut I forgot to tighten.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads for: Congrats to 1lowcut!
Thread	Thread Starter	Forum	Replies	Last Post
Congrats Rich on the new wheels	UCYI3WL	Lowrider Discussions	4	12-13-2002 11:54 AM