[ATTACH][ATTACH][ATTACH][/ATTACH][/ATTACH][/ATTACH]here are sum pics of my wagon....

[mr64magic]

I think you could bag the wagon like you talked about. Are still planning on trying it? You will need to fabricate some brackets. Do you weld custom? What are your plans for it.

[SLAMMED63CHEVY]

Okay my little Fruity Fairy Friend, it looks like it is possible you will need 2-small bags, 4-valves 1-compressor, 2-switches, low PSI pressure switch, relay, some fittings, 12v car battery and 1-tank (1-3 gallon) but a 3 gallon tank might be too big. You need to think about everything like where is it all going to go, if you are thinking what I think your thinking then you will put everything in the middle of the wagon that will make it top heavy at low pressure so you will need to make like a roll cage or reinforce the wood side walls or something like that, so if it dose roll over the all your air stuff wont get messed up. It will be a tight fit and wont leave you room for a lot of mistakes it will be challenging but if you take your time and plan it out very carefully then you will have a bagged Radio Flyer.

[SLAMMED63CHEVY]

And some other thing you need to think of is you will be changing how the wheel axels are bolted to the wagon you might need to make a pivot or hinge to keep it straight when you lift and lower. It is going to take some ingenuity and a lot of fabrication to get the job done.

[1lowcut]

Is he serious?? I thought he was being a smart ass. If you do build this they have small airbags that go under the cabs of rigs that would work good for this project.

[SLAMMED63CHEVY]

Ya I know but finding one for cheap is a diff. story
he will have to stoke a lot of fairy wond to get his wagon done

okay,slammed63chevy can u post up every thing i need to buy...or af any 1 has some air ride stuff 4 sale ill get it...

Originally Posted by mr64magic

I think you could bag the wagon like you talked about. Are still planning on trying it? You will need to fabricate some brackets. Do you weld custom? What are your plans for it.

i dont weld but,my grampa does ill have him do it,u got any air ride parts i can get??

how much for all of the air ride?

[SLAMMED63CHEVY]

Originally Posted by SLAMMED63CHEVY

Okay my little Fruity Fairy Friend, it looks like it is possible you will need 2-small bags, 4-valves 1-compressor, 2-switches, low PSI pressure switch, relay, some fittings, 12v car battery and 1-tank (1-3 gallon) but a 3 gallon tank might be too big. You need to think about everything like where is it all going to go, if you are thinking what I think your thinking then you will put everything in the middle of the wagon that will make it top heavy at low pressure so you will need to make like a roll cage or reinforce the wood side walls or something like that, so if it dose roll over the all your air stuff wont get messed up. It will be a tight fit and wont leave you room for a lot of mistakes it will be challenging but if you take your time and plan it out very carefully then you will have a bagged Radio Flyer.

you might think about making a frame with the air stuff and just putting the Radio Flyer tub on the new frame