[impalaman]

the car is very tight, difinetely lots of money into it.

[Del Valle CC]

[quote]Originally posted by MR IMPALA:
<strong>Well you figure a stock 2 dr fleetwood is 3500 and up if you can find them 1500 or more for the update 700 for the wheels 2000 or more for the top and interior 5,000 to paint it and update it 2000 for a basic hydro setup steering wheel 200 that flip screen was probably 1500 or more murals 1000 pinstriping 500 so there you have it thats over 15k right???</strong><hr></blockquote>
2Dr Fleetwood $400 junkyard
Update it to a euro kit $dont know? 1K?
Paint Job $500 (thats material costs) have a member (wouldnt charge me)
Wheels $0 I have a set of Daytons
Interior $400 have a member (material cost)
Hydraulics $900 (just buy a setup) have a friend to install them
Audio/neons $0 have a sponser
pinstriping $0 have a friend
murals $0 have a friend
There you have it, alittle more, alittle less... thats with sponsers and who you know. less than 5K right...... All who you know in Lowriding.

[ September 11, 2002: Message edited by: Del Valle CC ]</p>

[OrangeCounty58]

[quote]Originally posted by Del Valle CC:
<strong>
2Dr Fleetwood $400 junkyard
Update it to a euro kit $dont know? 1K?
Paint Job $500 (thats material costs) have a member (wouldnt charge me)
Wheels $0 I have a set of Daytons
Interior $400 have a member (material cost)
Hydraulics $900 (just buy a setup) have a friend to install them
Audio/neons $0 have a sponser
pinstriping $0 have a friend
murals $0 have a friend
There you have it, alittle more, alittle less... thats with sponsers and who you know. less than 5K right...... All who you know in Lowriding.

[ September 11, 2002: Message edited by: Del Valle CC ]</strong><hr></blockquote>


not very realistic. materials alone on that car is going to run about 600-1000. we are talking getting people to do it all. talking about sponsors, and homies. interior like that better have someone who knows what they are doing. top notch work costs top notch money. bumpers and just front header panel hook price at 800 bux. now get a 90 dash and make it work another 400 bux. dont forget the moldings,chromes. another 400 bux or so. not going to be cheap. not many fleetwoods at the junk yard. if it is what condition?

[ September 11, 2002: Message edited by: OrangeCounty58 ]</p>

[Del Valle CC]

What I put is realistic to me....
My dads friend owns a junkyard, so I get pretty much anything I need for free. I was going to pay 250 for the 83 2dr Brougham. Clean body, no dents, clean interior, but the engine was blown. So I got the Cutlass instead. I dont know how much a euro kit for a caddy would cost. But other than that, everything is a breeze. That Caddy is real nice, but for 15K, It should atleast have an all chrome under-carriage.

[chopshop]

the only thing i dont like is the tweed

[ice64berg]

[quote]Originally posted by Unity_Jon:
<strong>To get a smooth mirror inside the hood and trunk use the sticky mirror film that you heat up, you can cut it over size and slide it under the ridges and strengthener bars and stuff then after you've stuck it down (like a big sticker) you heat it up and pulls really tight giving a perfect mirror finish. </strong><hr></blockquote>

can you tell us a lil more detail like a product name...i was thinking about mirrored plexi ...or stainless steel ... thou i have been wanting to do this a few years.... theres gonna be a long cold winter ....hopefully..

[Del Valle CC]

Plexi-glass would be your best bet. It is a mirror finish.

[rlowride]

and plexi isnt too hard too work with either if you want to make stuff with it....