Lowriders

velleco · 08-14-2007, 07:11 PM

i have an 82 elco with 18 in rear the problems im havings is the will not extend fully without doing a change bridge how can i get them to extend fully and be able to drive? i already extended the upper trailing arms
thanzs for you advice

08-16-2007, 01:34 AM

chain bridge,i dont think u still gonna get all 18inches of lift tho

LOW4LIF · 08-16-2007, 02:22 PM

what all have you done to your ride so far besides the c-arms..

velleco · 08-20-2007, 09:32 PM

beside adding the 18 strokes i re-inforcsed lower & UPPER A-ARMS
2 PUMPS TO THE HEAD 1 TO THE BACK 12 BATTERIES 4 SWITCHES

juicedkandy · 08-26-2007, 12:04 PM

u need to drop your upper trailing arm mounts,,,,and maybe even your lower mounts too,,,,,it would be a good idea to even move them forward some,,and get some longer arms.....but dropping the mounts some makes a big difference

velleco · 08-27-2007, 10:54 AM

thazs juice for the reply
i extended & moved the mounts on the upper appear so you feel i need to also move the mounts on the lower also? also do you thinkk i can still roll w/out a slip driveshaft?

LOW4LIF · 08-28-2007, 10:24 AM

Even on 10" cylos I run a long slip....

velleco · 08-28-2007, 10:11 PM

does anybody know of a post i can goto to make my own slip driveshaft?

08-14-2007, 07:11 PM	#1 (permalink)
velleco Registered User Join Date: Aug 2007 Posts: 4	elco with 18inch strokes in rear help? i have an 82 elco with 18 in rear the problems im havings is the will not extend fully without doing a change bridge how can i get them to extend fully and be able to drive? i already extended the upper trailing arms thanzs for you advice

08-16-2007, 01:34 AM	#2 (permalink)
custom impala ( BANNED ) ( SCAM ARTIST ) Posts: n/a	Re: elco with 18inch strokes in rear help? chain bridge,i dont think u still gonna get all 18inches of lift tho

08-16-2007, 02:22 PM	#3 (permalink)
LOW4LIF UNITEDRIDAZ C.C. Join Date: Apr 2007 Location: Montana Posts: 96	Re: elco with 18inch strokes in rear help? what all have you done to your ride so far besides the c-arms..

08-20-2007, 09:32 PM	#4 (permalink)
velleco Registered User Join Date: Aug 2007 Posts: 4	Re: elco with 18inch strokes in rear help? beside adding the 18 strokes i re-inforcsed lower & UPPER A-ARMS 2 PUMPS TO THE HEAD 1 TO THE BACK 12 BATTERIES 4 SWITCHES

08-26-2007, 12:04 PM	#5 (permalink)
juicedkandy Registered User Join Date: Jun 2002 Location: pensacola, florida Posts: 1,061	Re: elco with 18inch strokes in rear help? u need to drop your upper trailing arm mounts,,,,and maybe even your lower mounts too,,,,,it would be a good idea to even move them forward some,,and get some longer arms.....but dropping the mounts some makes a big difference

08-27-2007, 10:54 AM	#6 (permalink)
velleco Registered User Join Date: Aug 2007 Posts: 4	Re: elco with 18inch strokes in rear help? thazs juice for the reply i extended & moved the mounts on the upper appear so you feel i need to also move the mounts on the lower also? also do you thinkk i can still roll w/out a slip driveshaft?

08-28-2007, 10:24 AM	#7 (permalink)
LOW4LIF UNITEDRIDAZ C.C. Join Date: Apr 2007 Location: Montana Posts: 96	Re: elco with 18inch strokes in rear help? Even on 10" cylos I run a long slip....

08-28-2007, 10:11 PM	#8 (permalink)
velleco Registered User Join Date: Aug 2007 Posts: 4	Re: elco with 18inch strokes in rear help? does anybody know of a post i can goto to make my own slip driveshaft?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads for: elco with 18inch strokes in rear help?
Thread	Thread Starter	Forum	Replies	Last Post
W T B 1981 Cadillac rear Bumper Fillers..	DRLOWZ	Wanted	6	02-13-2008 11:19 AM
Old school rear window blinds...	Santo	Interior & Exterior	1	05-26-2007 06:22 PM
rear window trim install	spook	Interior & Exterior	2	01-24-2007 07:18 PM
original rear veiw mirror	impalarearveiw	For Sale	2	08-07-2006 08:42 PM

Lowriders

elco with 18inch strokes in rear help?

elco with 18inch strokes in rear help?