MOTOR Question Someone help me

phatalaskan · 04-24-2003, 06:55 AM

Im just starting to learn and dig into hydraulics I have a 64 impala with 2 street showtime pumps I recently had one pump leak hydraulic oil into my motor. Im not too sure how it leaked into it, there is the one o ring under the pump head on the block, it had a slice in it. I need to make sure that is the only thing or way it could have leaked by b4 I put on a new motor. Any feedback would be greatly appreciated. april 23, 2003 <img src="confused.gif" border="0">

DRLOWZ · 04-24-2003, 07:00 AM

Do you use any type of messenger service?

phatalaskan · 04-24-2003, 07:06 AM

[quote]Originally posted by DRLOWZ:
<strong>Do you use any type of messenger service?</strong><hr></blockquote>
no just email

DRLOWZ · 04-24-2003, 07:08 AM

Well as long as you have the pump apart you might as well change all the orings. Also besure to check the seal..

phatalaskan · 04-25-2003, 07:08 PM

Whats a good way to test the pump for leaks without throwing the pump back in to the vehicle?

DRLOWZ · 04-25-2003, 10:43 PM

If you have replaced all the o-rings and seals then that is about all the assurance you can do..Put it back in and hope for the best.

phatalaskan · 04-26-2003, 04:39 AM

Thanks for your help, there is only me and one other guy in southcentral AK sittin low so there is not anyone else to dig info from. I appreciate the feedback.

DRLOWZ · 04-26-2003, 04:50 AM

No problem, what club are you all rollin?

phatalaskan · 05-05-2003, 11:45 PM

I have no affiliation yet, Looks my problem was just a bad oring under the pumphead. Its all fixed now and back on the road thanks.

phatalaskan · 05-05-2003, 11:48 PM

All we have up here in Southcentral Ak is my 64 impala and a buddy of mine has a mazda b2200 both street set-ups.

04-24-2003, 06:55 AM	#1 (permalink)
phatalaskan Registered User Join Date: Apr 2003 Location: nikiski, ak Posts: 6	MOTOR Question Someone help me Im just starting to learn and dig into hydraulics I have a 64 impala with 2 street showtime pumps I recently had one pump leak hydraulic oil into my motor. Im not too sure how it leaked into it, there is the one o ring under the pump head on the block, it had a slice in it. I need to make sure that is the only thing or way it could have leaked by b4 I put on a new motor. Any feedback would be greatly appreciated. april 23, 2003 <img src="confused.gif" border="0">

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads for: MOTOR Question Someone help me
Thread	Thread Starter	Forum	Replies	Last Post
Question for Everyone	UCYI3WL	Lowrider Discussions	8	03-07-2003 04:49 PM
Question about streethopping	MAJESTIX64RIDA	Lowrider Discussions	17	10-02-2002 05:48 PM
mazda motor	UnitedRidaZ	For Sale	0	09-24-2002 12:41 AM
Question for all...	UCYI3WL	Lowrider Discussions	19	08-01-2002 05:39 PM
12V Motor problem HELP	G Funk	Hydraulics & Suspensions	6	07-27-2002 09:45 PM

04-24-2003, 07:00 AM	#2 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,371	Do you use any type of messenger service?

04-24-2003, 07:06 AM	#3 (permalink)
phatalaskan Registered User Join Date: Apr 2003 Location: nikiski, ak Posts: 6	[quote]Originally posted by DRLOWZ: <strong>Do you use any type of messenger service?</strong><hr></blockquote> no just email

04-24-2003, 07:08 AM	#4 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,371	Well as long as you have the pump apart you might as well change all the orings. Also besure to check the seal..

04-25-2003, 07:08 PM	#5 (permalink)
phatalaskan Registered User Join Date: Apr 2003 Location: nikiski, ak Posts: 6	Whats a good way to test the pump for leaks without throwing the pump back in to the vehicle?

04-25-2003, 10:43 PM	#6 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,371	If you have replaced all the o-rings and seals then that is about all the assurance you can do..Put it back in and hope for the best.

04-26-2003, 04:39 AM	#7 (permalink)
phatalaskan Registered User Join Date: Apr 2003 Location: nikiski, ak Posts: 6	Thanks for your help, there is only me and one other guy in southcentral AK sittin low so there is not anyone else to dig info from. I appreciate the feedback.

04-26-2003, 04:50 AM	#8 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,371	No problem, what club are you all rollin?

05-05-2003, 11:45 PM	#9 (permalink)
phatalaskan Registered User Join Date: Apr 2003 Location: nikiski, ak Posts: 6	I have no affiliation yet, Looks my problem was just a bad oring under the pumphead. Its all fixed now and back on the road thanks.

05-05-2003, 11:48 PM	#10 (permalink)
phatalaskan Registered User Join Date: Apr 2003 Location: nikiski, ak Posts: 6	All we have up here in Southcentral Ak is my 64 impala and a buddy of mine has a mazda b2200 both street set-ups.