[low_joe11]

Hey every1 Im new 2 this and need a bit of help, I have a 87 Monte Carlo LS. I currently dont have any switches or anything, but Im trying 2 get all the parts I need 2gether so I wont have the front juiced, and a stock rear and look like sum BS. anyways I have a set of 18 Inch Side port Cylinders. I know 18s sound a bit beyond basic lol for a daily driver but I love the lifted look. Im wanting the lifted look for cruisin but the layed out look for parking, this is a bit tricky considering if I use small coils it will bust through like it did on my buddies Regal. and I cant afford 2 have 2 go scrapyard searchin for a windshield. and If I use some giant Coils, it wont lay. I know I want the best of both worlds, but if any1 has some ideas, hit me up. thanx alot. -Joe

[Miser211]

710.196
Super Deep Bottom Coil-Over Cups
Your Price: $79.95 Page Ranking.

CCE dont think these will help but it will let you lay a little more with running alot of coil.

[Miser211]

18's you have to run a slipyoke, 5-6 dropmounts, and extendable uppers.

If it was me I would sell them and get some 16's good medium between both worlds. You still have to do a slipyoke and dropmounts but you might get away with out using extendable uppers. You back glass will thank you also.

[pcp]

What's a slipyoke? I was just thinking of that last night and keep searching for it here and on lil but I couldn't find it. Not even a pic just to give me an idea of what it does.

[Miser211]

should be a spring in the middle. attaches to the driveshaft to let move back and forth

[low_joe11]

thanx Miser211. I jus bought a setup. I have a rack, 6 deep cycle batteries. all the hoses, cables, solenoids,two 6" clyinders, and two 10" comp. cylinders, the coils and cups, and 2 Pro Hoppers, and a Showtime pump, and 10 switches. I still need the powerballs, & a switchbox. thank you for the reply, and all the info I need. it really helps alot. sweet Cutlass by the way. -Joe