[johnnyq]

i'm new to this site and if you guys coverd this my bad,,,, but im tryin to run six batts to one pump and ive tried three four and five selenoids,, three diff times and as soon as the switch is hit it pops the noid that the swwitch is hooked up to it seems like i dont have them in series but they are........ can any one help im tired of two feet of air and four batts....

[DRLOWZ]

The first question are what solenoids are you using and what is the entire setup..

[Miser211]

Originally Posted by johnnyq

i'm new to this site and if you guys coverd this my bad,,,, but im tryin to run six batts to one pump and ive tried three four and five selenoids,, three diff times and as soon as the switch is hit it pops the noid that the swwitch is hooked up to it seems like i dont have them in series but they are........ can any one help im tired of two feet of air and four batts....

sounds like shitty noids or bad wiring job. if anything try running it of the 4th batt to the noids. then the noids run a wire to the fifth. Run a straight 72v to the pump and see what happens.

[low_joe11]

instead of just using some old ford noids, that are basic, go for tha Solenoid Blocks man. they're like 60 bucks and a bit pricey but I swear you wont have this prob. again trust me.

[johnnyq]

the wiring isnt shitty promise that cuz my pops has been hoppin since the eightys and he knows whats flowin except for this issue and it will work on four batts but not on six man im sick of chippin

[Miser211]

Originally Posted by johnnyq

the wiring isnt shitty promise that cuz my pops has been hoppin since the eightys and he knows whats flowin except for this issue and it will work on four batts but not on six man im sick of chippin

use accurates aka accumax noids. Blocks from what I hear dont work well when you are running 72v or more. But I would try wiring it to were they see 48v but you pump sees 72v like i said up top.

I have been running the same 3 accurate noids for the last 2 years at 72v and havent burnt one yet. Knock on wood.

[johnnyq]

alright homie i dont think i under stand what ur sayin so correct me if im wrong,,,,, ur tellin me to run it like it is now, but instead of movin the hot on the noids to the fifth batt, just jump a wire from the fourth batt with the noid to the fifth.... if u got a pic that might help or a diagram.....

[johnnyq]

ive use every kind of noid out there and have blew over two bills on them noids.... i bought the setup from albuquerque n.m. brand new. mad hopper hydraulics is the brand

[Miser211]

Originally Posted by johnnyq

alright homie i dont think i under stand what ur sayin so correct me if im wrong,,,,, ur tellin me to run it like it is now, but instead of movin the hot on the noids to the fifth batt, just jump a wire from the fourth batt with the noid to the fifth.... if u got a pic that might help or a diagram.....

Your noids are only seeing 36v is this diagram. Just apply it to your car and see if that fixes it. If it doesnt It is a wiring issue or bad parts. Im not running mine this way I got 72v going into and out my noids but do what you gota do to make it work.

[johnnyq]

alright bro illl bro ill try that thanks alot man and what size of springs and coils do i need to catch about four feet of air