Lowriders

djmidnite · 03-18-2003, 08:30 PM

i replaced all my solenoids with new ones (accurate) and rewired everything when i go to hit the switch there is a lot of clicking and sputtering going on and it barely lifts, this is occuring for the front and the back. What is going on?? can any one help??

Wicked One · 03-18-2003, 09:35 PM

your batteries are dead or you have one bad one.

fatdaddy · 03-19-2003, 10:58 AM

or your earths are bad

Unity_Jon · 03-19-2003, 11:33 AM

99% certain you'll have a bad earth, are the solenoids earthed the same as the old ones, clean any paint or dirt off the earth points and make sure all the connections are really clean.

BUD · 03-19-2003, 03:13 PM

earthed? I've never heard that term before, here we call it grounded. I'm not hating or trying to laugh at ya'll don't get me wrong. Is that the actual term there? Or is that slang ya'll use?

UCYI3WL · 03-19-2003, 06:12 PM

I use the word grounded as well Bud but i have heard it called earthed before...

lil6yplayboy · 03-19-2003, 06:21 PM

we call it what ever word comes out the mouth...

hit your knuckles while unbolting a ground Fuckin lil bastard!

lol.....

DRLOWZ · 03-19-2003, 06:51 PM

[quote]Originally posted by lil6yplayboy:
we call it what ever word comes out the mouth...

hit your knuckles while unbolting a ground Fuckin lil bastard!

lol.....<hr></blockquote>

Arc the positive and "earth"... and see what you call it..

rlowride · 03-20-2003, 01:24 AM

[quote]Originally posted by DRLOWZ:


Arc the positive and "earth"... and see what you call it..<hr></blockquote>

weld your high school ring to your finger while grounding out the wrench you are using to tighten down a positive.. and you will see how much i fucking laugh at you!!!!!!!!!

vertex · 03-24-2003, 04:05 AM

[quote]Originally posted by rlowride:


weld your high school ring to your finger while grounding out the wrench you are using to tighten down a positive.. and you will see how much i fucking laugh at you!!!!!!!!!<hr></blockquote>

the best is when we were arguing about who was going to losen my wires on my batts because i kept getting shocked.

03-18-2003, 08:30 PM	#1 (permalink)
djmidnite Registered User Join Date: Mar 2003 Location: georgetown, texas Posts: 5	help help help my system is sick!!!!!! i replaced all my solenoids with new ones (accurate) and rewired everything when i go to hit the switch there is a lot of clicking and sputtering going on and it barely lifts, this is occuring for the front and the back. What is going on?? can any one help??

03-19-2003, 06:51 PM	#8 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 4,938	[quote]Originally posted by lil6yplayboy: <strong>we call it what ever word comes out the mouth... hit your knuckles while unbolting a ground Fuckin lil bastard! lol.....</strong><hr></blockquote> Arc the positive and "earth"... and see what you call it..

03-20-2003, 01:24 AM	#9 (permalink)
rlowride UnitedRidaz C.C. Join Date: Jun 2002 Location: Giant sink hole in FLA. Posts: 2,943	[quote]Originally posted by DRLOWZ: <strong> Arc the positive and "earth"... and see what you call it..</strong><hr></blockquote> weld your high school ring to your finger while grounding out the wrench you are using to tighten down a positive.. and you will see how much i fucking laugh at you!!!!!!!!!

03-24-2003, 04:05 AM	#10 (permalink)
vertex Registered User Join Date: Jun 2002 Location: tampa fl Posts: 24	[quote]Originally posted by rlowride: <strong> weld your high school ring to your finger while grounding out the wrench you are using to tighten down a positive.. and you will see how much i fucking laugh at you!!!!!!!!!</strong><hr></blockquote> the best is when we were arguing about who was going to losen my wires on my batts because i kept getting shocked.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2003, 09:35 PM	#2 (permalink)
Wicked One Registered User Join Date: Oct 2002 Posts: 3	your batteries are dead or you have one bad one.

03-19-2003, 10:58 AM	#3 (permalink)
fatdaddy Registered User Join Date: Jun 2002 Location: UK Posts: 25	or your earths are bad

03-19-2003, 11:33 AM	#4 (permalink)
Unity_Jon Registered User Join Date: Jun 2002 Location: United Kingdom Posts: 240	99% certain you'll have a bad earth, are the solenoids earthed the same as the old ones, clean any paint or dirt off the earth points and make sure all the connections are really clean.

03-19-2003, 03:13 PM	#5 (permalink)
BUD Registered User Join Date: Jun 2002 Location: AMARILLO, TX Posts: 129	earthed? I've never heard that term before, here we call it grounded. I'm not hating or trying to laugh at ya'll don't get me wrong. Is that the actual term there? Or is that slang ya'll use?

03-19-2003, 06:12 PM	#6 (permalink)
UCYI3WL UnitedRidaz C.C. Join Date: Jun 2002 Location: Birmingham, AL Posts: 2,813	I use the word grounded as well Bud but i have heard it called earthed before...

03-19-2003, 06:21 PM	#7 (permalink)
lil6yplayboy UnitedRidaz C.C. Join Date: Jun 2002 Location: NAPTOWN...Where Gurls taste like Chicken Posts: 1,486	we call it what ever word comes out the mouth... hit your knuckles while unbolting a ground Fuckin lil bastard! lol.....

Similar Threads for: help help help my system is sick!!!!!!
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer system FOR SALE.	alaskan_og	For Sale	2	11-20-2003 09:17 AM
thought i was gunna be sick	UnitedRidaZ	Off Topic	6	04-23-2003 12:24 AM
omg im so F'ing sick	UnitedRidaZ	Off Topic	34	03-07-2003 02:08 PM
Sick for the Holidays	UCYI3WL	Off Topic	18	12-20-2002 04:14 AM
Ordered Air Intake system	UCYI3WL	Lowrider Discussions	15	09-10-2002 12:39 PM

Lowriders

help help help my system is sick!!!!!!

help help help my system is sick!!!!!!