Lowriders

DRLOWZ · 07-16-2002, 11:42 PM

That them little spline keys for the pumpheads are $10......

UCYI3WL · 07-17-2002, 04:23 PM

Damn...Thats high as hell for a key...They were 2.50 each from reds whan i use to go thru them weekly...What brand you running Dr??

DRLOWZ · 07-17-2002, 04:44 PM

Well not sure what brand of what your looking for but here goes:

My 1st 2 pumps I ever bought,and still have, are from LOWRIDER HYDRAULICS. Never have had one bit of trouble out of them other than a few dump orings. They are now 10 years old and have the cast blocks
My 2nd set of pumps are just kinda thrown together, prestolite motors, gold tanks, and one of them even have a pumphead that Chuck sent me(Thanks Chuck)
Front cylinders are REDS, but they are beat to hell.
Rear cylinders are HIJACKER from Scrub City when Jay Foley was still around.

Well thats it for now.....

Dennis

[ July 17, 2002: Message edited by: DRLOWZ ]</p>

07-17-2002, 08:14 PM

hope it works for ya so u can get the car to showdown!

UCYI3WL · 07-17-2002, 08:34 PM

I dont know if you remember the keys from reds pumps back in 96 but thats what i was paying 2.50 for...With new motors, you could count on breaking at least 5

I wonder if keys are universal or not?? Anyone know??

DRLOWZ · 07-17-2002, 09:07 PM

I believe they are. I think they only make like 4 or 5 diferent types.

UCYI3WL · 07-17-2002, 09:19 PM

Who was charging you 10 bucks a key??

DRLOWZ · 07-17-2002, 09:36 PM

Thats what they cost at <a href="http://www.coolcars.org" target="_blank">www.coolcars.org</a>

UCYI3WL · 07-17-2002, 10:01 PM

which one do you need?? I'll call around and see if i can do better than that...
9 to 9
9 to 16
16 to teng

DRLOWZ · 07-17-2002, 10:42 PM

Thanks Mike but I already went and got one. Needed it real bad. I got the 16 to spline. Little bastard.

Dennis

07-16-2002, 11:42 PM	#1 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 4,938	I can't believe............ That them little spline keys for the pumpheads are $10......

07-17-2002, 04:44 PM	#3 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 4,938	Well not sure what brand of what your looking for but here goes: My 1st 2 pumps I ever bought,and still have, are from LOWRIDER HYDRAULICS. Never have had one bit of trouble out of them other than a few dump orings. They are now 10 years old and have the cast blocks My 2nd set of pumps are just kinda thrown together, prestolite motors, gold tanks, and one of them even have a pumphead that Chuck sent me(Thanks Chuck) Front cylinders are REDS, but they are beat to hell. Rear cylinders are HIJACKER from Scrub City when Jay Foley was still around. Well thats it for now..... Dennis [ July 17, 2002: Message edited by: DRLOWZ ]</p>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-17-2002, 04:23 PM	#2 (permalink)
UCYI3WL UnitedRidaz C.C. Join Date: Jun 2002 Location: Birmingham, AL Posts: 2,813	Damn...Thats high as hell for a key...They were 2.50 each from reds whan i use to go thru them weekly...What brand you running Dr??

07-17-2002, 08:14 PM	#4 (permalink)
UnitedRidaZ Posts: n/a	hope it works for ya so u can get the car to showdown!

07-17-2002, 08:34 PM	#5 (permalink)
UCYI3WL UnitedRidaz C.C. Join Date: Jun 2002 Location: Birmingham, AL Posts: 2,813	I dont know if you remember the keys from reds pumps back in 96 but thats what i was paying 2.50 for...With new motors, you could count on breaking at least 5 I wonder if keys are universal or not?? Anyone know??

07-17-2002, 09:07 PM	#6 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 4,938	I believe they are. I think they only make like 4 or 5 diferent types.

07-17-2002, 09:19 PM	#7 (permalink)
UCYI3WL UnitedRidaz C.C. Join Date: Jun 2002 Location: Birmingham, AL Posts: 2,813	Who was charging you 10 bucks a key??

07-17-2002, 09:36 PM	#8 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 4,938	Thats what they cost at <a href="http://www.coolcars.org" target="_blank">www.coolcars.org</a>

07-17-2002, 10:01 PM	#9 (permalink)
UCYI3WL UnitedRidaz C.C. Join Date: Jun 2002 Location: Birmingham, AL Posts: 2,813	which one do you need?? I'll call around and see if i can do better than that... 9 to 9 9 to 16 16 to teng

07-17-2002, 10:42 PM	#10 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 4,938	Thanks Mike but I already went and got one. Needed it real bad. I got the 16 to spline. Little bastard. Dennis

Lowriders

I can't believe............

I can't believe............