does this look rite

juicedoutsoon · 08-16-2003, 03:28 PM

That ground wire from the batts get connected wit one end wire that come from the discconeect and the lother end goes to ground (chassis metal rite????

DRLOWZ · 08-16-2003, 10:03 PM

Yes

...........

rlowride · 08-17-2003, 07:09 PM

you guys are spinnin your wheels with this kid......

juicedoutsoon · 08-17-2003, 07:58 PM

Dennis sign on aim man see how folks are gettin tried of my questions and i don't want to make this topic longer but until u do here are some questions.......

1.so on the side post there is only supposed to be on ring connector on each side post correct????

2. I was wanderin um u know how the side post on the noids has a bolt that where u have to unscrew and slide the ring connector in and slide it back on what tool would remove that and the tools how about the top post thanks............

Come man sign on aim i still need help wit the above to 2 question, and how many ring connectors would da switch have and same go for the top post on the noid after that i'm done thanks..........

08-17-2003, 10:06 PM

1.so on the side post there is only supposed to be on ring connector on each side post correct???? CORRECT
2. I was wanderin um u know how the side post on the noids has a bolt that where u have to unscrew and slide the ring connector in and slide it back on what tool would remove that and the tools how about the top post thanks............ PLIARS

now go away

juicedoutsoon · 08-17-2003, 10:26 PM

1. hey hold tight we are almost finish um how many ring connector should the top prong on the noid have because that what gets me confused because if i have 2 noid if i link one prong to the other then each would have one ring connector then now what would i have to do wit the noid wire coming from the carlin switches????

2. Dennis da diagram drew was perfect but i need to make sure and get this straight because the passin line that u drew on the switches confused me if i have 2 switches how many ring connector intotal would the linkin power wire and noid wire have thanks.......

That about it man......

08-17-2003, 11:24 PM

19

bye

juicedoutsoon · 08-18-2003, 09:07 AM

Unitedridaz- You know what i don't even want to post in my topic because how do u expect me to know what 19........ 19 WHAT U GOTTA BE SEPCIFIC.......... I asked 2 question so dennis can u reply to it since u drew it and also I'M NOT GONNA STOP POSTIN UNTIL DENNIS TELL ME SO AND OR HE SIGN ON AIM.............

DRLOWZ · 08-18-2003, 09:26 AM

You lost me on the whole ring connector question.....

08-18-2003, 10:27 AM

this is what im talking about 19 ring coinnectors what else u asked how many ring connectors

19

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-16-2003, 03:28 PM	#21 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	That ground wire from the batts get connected wit one end wire that come from the discconeect and the lother end goes to ground (chassis metal rite????

08-16-2003, 10:03 PM	#22 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,242	Yes ...........

08-17-2003, 07:09 PM	#23 (permalink)
rlowride UnitedRidaz C.C. Join Date: Jun 2002 Location: Giant sink hole in FLA. Posts: 2,990	you guys are spinnin your wheels with this kid......

08-17-2003, 07:58 PM	#24 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	Dennis sign on aim man see how folks are gettin tried of my questions and i don't want to make this topic longer but until u do here are some questions....... 1.so on the side post there is only supposed to be on ring connector on each side post correct???? 2. I was wanderin um u know how the side post on the noids has a bolt that where u have to unscrew and slide the ring connector in and slide it back on what tool would remove that and the tools how about the top post thanks............ Come man sign on aim i still need help wit the above to 2 question, and how many ring connectors would da switch have and same go for the top post on the noid after that i'm done thanks..........

08-17-2003, 10:06 PM	#25 (permalink)
UnitedRidaZ Guest Posts: n/a	1.so on the side post there is only supposed to be on ring connector on each side post correct???? CORRECT 2. I was wanderin um u know how the side post on the noids has a bolt that where u have to unscrew and slide the ring connector in and slide it back on what tool would remove that and the tools how about the top post thanks............ PLIARS now go away

08-17-2003, 10:26 PM	#26 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	1. hey hold tight we are almost finish um how many ring connector should the top prong on the noid have because that what gets me confused because if i have 2 noid if i link one prong to the other then each would have one ring connector then now what would i have to do wit the noid wire coming from the carlin switches???? 2. Dennis da diagram drew was perfect but i need to make sure and get this straight because the passin line that u drew on the switches confused me if i have 2 switches how many ring connector intotal would the linkin power wire and noid wire have thanks....... That about it man......

08-17-2003, 11:24 PM	#27 (permalink)
UnitedRidaZ Guest Posts: n/a	19 bye

08-18-2003, 09:07 AM	#28 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	Unitedridaz- You know what i don't even want to post in my topic because how do u expect me to know what 19........ 19 WHAT U GOTTA BE SEPCIFIC.......... I asked 2 question so dennis can u reply to it since u drew it and also I'M NOT GONNA STOP POSTIN UNTIL DENNIS TELL ME SO AND OR HE SIGN ON AIM.............

08-18-2003, 09:26 AM	#29 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,242	You lost me on the whole ring connector question.....

08-18-2003, 10:27 AM	#30 (permalink)
UnitedRidaZ Guest Posts: n/a	this is what im talking about 19 ring coinnectors what else u asked how many ring connectors 19