does this look rite

08-15-2003, 08:03 PM

Quote:

Originally Posted by switched84 cutlass

Run a wire trough the middle post of each switch and soldier it to each one .Like in the picture

ok see the line he drew thro the bottom part of the diagram thats ur 24 volt power use the round connector (round eyelet for wire blue end) to attach the wires but u will want to solder the 24 volt wire on

how bout this send me the switches and the wire and ill do it for you for the price of shipping here and back

and ill send it back with a diagram of what wire does what..

so here the deal u pay to ship me the switches and the wire and ill wire them up and u pay to have them shipped back

juicedoutsoon · 08-15-2003, 08:10 PM

unitedridaz ur so helpful do u have an aol aim screen name so i can im u so i don't make this post 10 page long and stuff.........

Also i think i got it are u sayin the carlin switches don't have prongs like the one on an automative 30amp relay it has like kinds like posts like on a soleniods if so i think i got it lol.........

juicedoutsoon · 08-15-2003, 09:39 PM

this is the drawing i drew lol please tell me if that look hundred percent correct???

let me explain this real quick don't have time to draw out 4 batts in seried to give 48v which is to power the pump motor and the 24v for the switches k........ this is how it would look like wit 1 pump 2 dump here it goes...........

Explanation: Okay in that pic is a round pump that says PF mean front pump and it has 2 dumps one for front left and one for front right....... each of the dump has 2 wires one is for power and other is for switches... then i drew out 2 noids for the pump and see how i ran the 48v from the batt to the side prong of the first soleniod and then i ran other wire to the next side prong on the same soleniod and so on then i ran it to the pump motor............ Now i drew out 2 switches wit 3 dots indicatin 3 prong or wateva, the front prong on the front switch went to the front left dump and then i jumped the power wire on middle prong to the next one on the switch then i ran another wire to the 24v batt......... then the 3rd prong on each switch went to one of the top prong on the switch..........

Is this correct??????

What i had problem was which last prong goes to which soleniod do i pick any or it goes in a certain order thanks guy.............

juicedoutsoon · 08-15-2003, 10:16 PM

ok heres the pic i was having trouble posting it up........... its not workin can someone tell me ther email address so i can send it so u can post it up for me????

DRLOWZ · 08-16-2003, 01:05 PM

unitedridaz@bellsouth.net

juicedoutsoon · 08-16-2003, 01:45 PM

ok dennis check ur mail..............

DRLOWZ · 08-16-2003, 02:12 PM

try this, I think thats it...

juicedoutsoon · 08-16-2003, 02:24 PM

dennis post mine up wasn't mine just like that man, also um did u read in the email what i had prob wit?????

DRLOWZ · 08-16-2003, 02:58 PM

Ok on the dumps you have 2 wires, one for GROUND and the other to the SWITCH.

Just follow my diagram and you will have no problems....

DRLOWZ · 08-16-2003, 02:59 PM

By the way your diagram was hard as hell to follow..

08-15-2003, 09:39 PM	#13 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	this is the drawing i drew lol please tell me if that look hundred percent correct??? let me explain this real quick don't have time to draw out 4 batts in seried to give 48v which is to power the pump motor and the 24v for the switches k........ this is how it would look like wit 1 pump 2 dump here it goes........... Explanation: Okay in that pic is a round pump that says PF mean front pump and it has 2 dumps one for front left and one for front right....... each of the dump has 2 wires one is for power and other is for switches... then i drew out 2 noids for the pump and see how i ran the 48v from the batt to the side prong of the first soleniod and then i ran other wire to the next side prong on the same soleniod and so on then i ran it to the pump motor............ Now i drew out 2 switches wit 3 dots indicatin 3 prong or wateva, the front prong on the front switch went to the front left dump and then i jumped the power wire on middle prong to the next one on the switch then i ran another wire to the 24v batt......... then the 3rd prong on each switch went to one of the top prong on the switch.......... Is this correct?????? What i had problem was which last prong goes to which soleniod do i pick any or it goes in a certain order thanks guy............. Last edited by juicedoutsoon; 08-15-2003 at 09:56 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-15-2003, 08:10 PM	#12 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	unitedridaz ur so helpful do u have an aol aim screen name so i can im u so i don't make this post 10 page long and stuff......... Also i think i got it are u sayin the carlin switches don't have prongs like the one on an automative 30amp relay it has like kinds like posts like on a soleniods if so i think i got it lol.........

08-15-2003, 10:16 PM	#14 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	ok heres the pic i was having trouble posting it up........... its not workin can someone tell me ther email address so i can send it so u can post it up for me????

08-16-2003, 01:05 PM	#15 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,300	unitedridaz@bellsouth.net

08-16-2003, 01:45 PM	#16 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	ok dennis check ur mail..............

08-16-2003, 02:12 PM	#17 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,300	try this, I think thats it...

08-16-2003, 02:24 PM	#18 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	dennis post mine up wasn't mine just like that man, also um did u read in the email what i had prob wit?????

08-16-2003, 02:58 PM	#19 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,300	Ok on the dumps you have 2 wires, one for *GROUND* and the other to the *SWITCH*. Just follow my diagram and you will have no problems....

08-16-2003, 02:59 PM	#20 (permalink)
DRLOWZ Administrator Join Date: Jun 2002 Location: Bardstown,Kentucky Posts: 5,300	By the way your diagram was hard as hell to follow..