[mexicaninvasion95301]

how do i find that fusible link

[DRLOWZ]

yo would have to chase the wires from the solenoid all the way back to the ignition switch

[SIK_9D1]

Oh ya one more thing make sure the neutral safety switch didnt come lose its mounted on your steering column. That could have went bad also.

[mexicaninvasion95301]

I can see the wire that go's to the battery to the starter and another wire goint towards the ignition. What is that PPL wire? And how many wires should i have around the starter solenoid?

[mexicaninvasion95301]

How does this neutral safety switch look like. And by where in the steering column is located?

[SIK_9D1]

There should be three wire. the big one goes to the battery and then you should have two smaller wire one goes to the S side of the starter solenoid and the other wire goes to the R side of the starter solenoid.

[mexicaninvasion95301]

Thanks a lot man. Now i have an idea. Ill check out tomorrow morning. Ill hit u up on it if i still have problems.

[mexicaninvasion95301]

thanks for the prints it gave me a better idea

[DRLOWZ]

Dont be a stranger man....

[SIK_9D1]

No problem thats what we are here for. You need to check the wire that goes to the S side of the starter solenoid. Since the care starts and you are able to turn it off with the key i have a feeling its the a fusible link or the neutral safety switch. It is located on the steering column. Its black and looks like a half moon and it has a plug with seven wires on it.