[V.WES]

Wat Up Doe. Aye I Drew This To Help Me As Well As Anybody Else Trying To Run A Simuliar Setup. Slam & 1 Lowcut, Check This Out, Tell Me If Its Right. It Maybe A Lil Hard To See Because Of Down Sizing, But Let Me Kno What You Think.

[V.WES]

Wait This Is Ten Times Better!!!!! You Can Actually Read Some Of The Smaller Text

[1lowcut]

I think your gonna need a BIG ass trunk to fit two nitro bottles in it! Also looks to me by your diagram that you have a fill valve where the line from the tank goes into the four way. I know there's not but it looks like thats what your saying. I believe you can get fitting's that have a 1/8'' line out as well as the 1/2'' so you can run your pressure gauge off the same port. I dont think you will want to run big ass four ways in your system. You may be trying to display the dual valves to the front but thats not how you do it. An extra line will go from the tank directly to the bag with one valve between. You will have to have dual port bags for this.

[V.WES]

I Cant Run A Tank As Big As Yours, I Dont Really Have Enough Space For One. I Was Goin To Run Smaller Bottles, Which Is The Reason For 2. Well, Look At This, This Is Actually Where I'd Gotten The Idea From, I Just Put The Extra Parts I Wanted In. Is The Diagram Wrong Too? What Needs To Change? And Yea I Was Tryin To Display The Dual Valves In Front, How Do You Do It?

[1lowcut]

I dont run gauges so I dont have to deal with extra plumbing. How mine is done , change the four way to a three way, on one side will be your fill valve, on the oposite side will be your dump, the middle output will be to the bag. Now run a seperate line from the tank directly to the second valve, out of the valve the line will go to the bag.

I know slammed tapped his own gauge lines.

[1lowcut]

Suicide Doors

Use these tee's if you want gauges. I just wouldnt put in four ways. But I wouldnt put in the gauges either. Just a waste of money if you ask me. Slam made a nice center consul to mount all his so they dont look bad but aside from his car I dont like to see the gauges. Makes it look like hot rod and just adds another place to leak from or blow. I dont know how well they will hold under 400+ PSI Its only 1/8'' line

[SLAMMED63CHEVY]

I made my own tee for the gauges by drilling and tapping in a fitting....

[V.WES]

Originally Posted by 1lowcut

I dont run gauges so I dont have to deal with extra plumbing. How mine is done , change the four way to a three way, on one side will be your fill valve, on the oposite side will be your dump, the middle output will be to the bag. Now run a seperate line from the tank directly to the second valve, out of the valve the line will go to the bag.

I know slammed tapped his own gauge lines.

ok, whats second valve? We ran a three way, one side is the dump, the other is a fill and then the middle is goin str8 to the bag. are you sayin to split the line comin from the bag? thanks, i do like these valves better.

[1lowcut]

The second fill valve. You will have two lines running to your bag. You will need dual port bags for this. one line will have the fill and dump but the second line will only have a fill valve.

[V.WES]

o ok. I got you, now it all makes perfect sense. Ok, so do the slam's come with two ports, or did you drill and tap another line on the bag?