[frantzwyatt]

Aight guys so i just joined this forum a min ago looking for some help/information. This is the first im getting in the lowrider life so i dont know too much about it. Im looking to hook up 1985 Chevrolet c-10 pickup. My buddy told me to check out suicide doors.com for info. I called them looking for a price to build a 4 link system for and i could give himthe right information. He needed to know how long the bars need to be and how the bags are going to be installed. I was wondering if anyone can help me out with this if you got one of these or not.

I was also going to purchase the following:
Compressor-Oasis XD 3000 200 psi
Tank- 12 gallon 8 port
Bags- Slam specialties XS 600 psi dual port 7"
8 piece step notch kit
1/2" valves (8 pack)
1/2" air line
AVS ARC 9 Switchbox
Switchbox 9 Wire

What else will i need and will this be a proper set up for my truck. looking foryour help

Thanks
Wyatt

[1lowcut]

You will want nitrogen. Not required but with out it you will never reach the potential of thos XS bags. Your gonna have a bag that will take 600 PSI and you will never put more that 200 in them without nitrogen. Plus side is you dont have to hear a compressor run or wait for you tanks to fill. Down side is it's 4-500 bucks to get it in. Unless you have some hookups and a welding supply store. If you dont do that think about getting another conpressor. As for the four link, cant help you there my car came with a four link. If you need more help or have more questions just post em up and welcome to the site.

[SLAMMED63CHEVY]

Oasis XD 3000 is a monster compressor, I would rather spend the $1,300 on nitrogen then 1-compressor, granted that 1-Oasis can fill a 12 gallon tank from 0-200 PSI in about 5-min. Nitrogen can fill a 12 gallon tank from 0-600 PSI in under 5-seconds. Plus you will need to upgrade you battery and charging system because the Oasis compressors take some serious power when running, they will burn up if you run them on low voltage. I almost got the XD but at a $1,300 dollar price tag I went with nitrogen instead and saved $800. You can by 4 other good compressors and nitrogen for the price of 1-XD.

[frantzwyatt]

okay so for the money get nitrogen instead of the kd compressor. Are my vavles and lines line going to be the right size or is bigger better? Im still looking for specs on a four link setup so suicide doors can build me one. If any can help me with that or point me in the right direction of someone who could i would really appreciate it. I am going to wyotech and i will be taking a chasis fabrication class and this is going to be my project and i want to get it rolling as soon as possible

[SLAMMED63CHEVY]

Originally Posted by frantzwyatt

okay so for the money get nitrogen instead of the kd compressor. Are my vavles and lines line going to be the right size or is bigger better? Im still looking for specs on a four link setup so suicide doors can build me one. If any can help me with that or point me in the right direction of someone who could i would really appreciate it. I am going to wyotech and i will be taking a chasis fabrication class and this is going to be my project and i want to get it rolling as soon as possible

You can buy a four link kit. four linking a rear end gets a little technical to try to explain on the forums, you will learn all about that at Wyotech.

1/2 line and valves are good, it will be fast. If you are trying to hop over a foot then you might need bigger line and valves.

[1lowcut]

I would check the mini truck sites for help on your four link. They do that shit all the time.

[frantzwyatt]

aight ill check them out but if anybody's got some info ot help let me know