|
|
|
|
|
|
|
||||||
03-13-2008, 05:43 PM
|
#1 (permalink) |
|
Moderator!
UnitedRidaZ Idaho 
Join Date: Aug 2005
Location: Caldwell Barrio
Posts: 776
|
Add Nirous Tank, Help Me Slam And 1low
Okay fellas, I think this summer i got my shit together enough to try adding the Nitro tank to my air ride. I need to know EXCATLY HOW to do it. I'm gonna draw up or photo EXACTLY how I'm set up and where and what I need to add to make it Nitro. Just quickly for review. Got the two ten gallon tanks one for each side. Viair comps, Extreme 450psi valves. Slam bags. etc. So do I run a T fitting into the tank??? between the tank and compressor. I have pressure switches and relays for the compressors. I don't have the type of tank with the side ports. Just one port in both ends...Whatcha think?
|
|
|
|
|
03-13-2008, 05:46 PM
|
#2 (permalink) |
|
Moderator!
UnitedRidaZ Idaho
Join Date: Aug 2005
Location: Caldwell Barrio
Posts: 776
|
Re: Add Nirous Tank, Help Me Slam And 1low
I looked in the gallery at the pict of the cutty trunk but it's hella small I need to see it a little bigger to get right in there and see how ya didz it.
|
|
|
|
|
03-13-2008, 06:53 PM
|
#3 (permalink) |
|
AIR RIDE MODERATOR
Join Date: Apr 2007
Location: Reno, NV
Posts: 1,276
|
Re: Add Nirous Tank, Help Me Slam And 1low
Is both of you tank hooked together to equalized the pressure? If so you will only need to hook the Nitrogen to one of the tanks. Take a photo of your trunk so I can see your setup. I will take some photos of my setup and send it to you.
|
|
|
|
|
03-14-2008, 08:22 AM
|
#4 (permalink) |
|
AIR RIDE MODERATOR
Join Date: Apr 2007
Location: Reno
Posts: 778
|
Re: Add Nirous Tank, Help Me Slam And 1low
so your saying that right now you do not have an un-used port? If thats the case no big deal as long as you dont have all your valves mounted right off you tanks. If you do you should change that too.
|
|
|
|
Linear Mode
