[hotrods316]

Hey all,
I am having some trouble with my standard DOT lines and PTC fittings. I am going to try compression but I want another option. I need the hook up on some hydro hoses for my bags. They are 1/2 NPT into the bag. Anyone ever run them and where did you get them from.
How much are they and where can i get them.
Any help would be appreciated.
Thanks
Matt

[mr64magic]

Don't use the cheap plastic fittings. They are nothing but trouble. I've used all brass fittings with no crappy ass inserts. I have DOT line and brass haven't had a problem with them. Just a suggestion

[hotrods316]

Thanks Magic. You wanna sell me one of your blown bags. I wanna see if I can weld on one without disturbing the rubber. Wanna try it out on a junk one first though. Thanks

[boss air]

The DOT line should be good for 300psi or more. The cheap plastic fittings are good for about 80psi. The fittings I sell get run up to 380psi with no probs and are inexpensive.
It is overkill running Hydro lines but I run Stainless braided lines off my bags in the front or near any heat. At $25USD for 3' Braided hose that takes a flare fitting out of the bag is pretty cheap insurance on the front airlines, they look good too.

[1lowcut]

i have put 500PSI to my set up and didnt have a problem with the plastic D.O.T line or the valves. the bigest prblem i had was trying to get slammed63 to stop humping my tires.....you could run that pressure too if you stop being a baby

[SLAMMED63CHEVY]

Originally Posted by 1lowcut

i have put 500PSI to my set up and didnt have a problem with the plastic D.O.T line or the valves. the bigest prblem i had was trying to get slammed63 to stop humping my tires.....you could run that pressure too if you stop being a baby

Yes it’s true I was humping the tire but it was because I installed one dam good air setup. If I had the money I would have done it to my car and humped my tire.

[1lowcut]

now dont try and take credit for my setup you help allot and do an OK job but that was all me. your set up may handle 400PSI but your scared to find out. com'on lets but some real pressure in there and see what it does. We'll film it so if it breaks you can post it

[SLAMMED63CHEVY]

Originally Posted by 1lowcut

now dont try and take credit for my setup you help allot and do an OK job but that was all me. your set up may handle 400PSI but your scared to find out. com'on lets but some real pressure in there and see what it does. We'll film it so if it breaks you can post it

I don’t think so if I show you what my setup will do you wont be humping my car you will be trying to hump me and MY GAIT DON’T SWING THAT WAY so when you can control your self one day you might see my car in action but if you star to pop wood then I will have to punch you in the mouth.

[1lowcut]

that one was laim, you should slap yourself for posting it