[punjabistyle]

hey, finnaly got some extra money..decided to put air ride on my 63 impala, i'm new to this, if someone could please help me out as in wha i need to buy from scratch, my car is sitting on some cut off springs, i don't trust those springs soo i hardly drive my car. or if there is a website that has all the info, i searched a bit, but its bits and pieces i find

link to my car
http://www.cardomain.com/ride/692202

[punjabistyle]

and also, i forgot to add i want control to each wheel, and also 3 or more diff height adjustments if thats possible, if anyone can help me out thank you soo muchh

[spence]

you can use a manifold system similar to the ones used for hydraulics to control all four corners on an air system, but there is a problem in setting different hieght adjustments . but not impossible a separate linear switch with adjustable switches would have to be added for front and back ,and then wired to the manifold to stop the hieght at different levels that you can set Ive done this befor on hydros and air systems.

[boss air]

Dude, easy problem to fix.
You need a bag kit with a 10 switch box for control (each wheel up/ down, side, side, all up/down, seasaw etc pre wired), at least a 6 gallon tank (I would say 2 x 5 gallons will fit nice each side of the trunk) 1 or 2 3cfm or bigger compressors, 1/2" diaphram valves (8 of 4 for up and 4 for down) pressure switch 110-150psi, a couple of gauges with dual needles to check your height, some 1/2" lines and fittings and you are set. Brackets are easy to make and I can supply diagrams (somehow) of brackets I have been making for many years that fit perfect. Expect to pay about $1100USD for a decent kit. Dont go to Chassistech, Airride pro or Aim, as they will not send you what you order (that are all the same company by the way, just got heaps of different smokescreen names). Go to a decent company that will give you what you need. If you want to know exactly what you "should get" in a bag kit PM me and I will list it exactly so you dont get ripped off.

[hotrods316]

Boss Can I have a diagram of your front brackets for a 64 biscayne. thanks so much, i can make them just want a guide to go by. thanks matt

[SLAMMED63CHEVY]

Originally Posted by punjabistyle

hey, finnaly got some extra money..decided to put air ride on my 63 impala, i'm new to this, if someone could please help me out as in wha i need to buy from scratch, my car is sitting on some cut off springs, i don't trust those springs soo i hardly drive my car. or if there is a website that has all the info, i searched a bit, but its bits and pieces i find

link to my car
http://www.cardomain.com/ride/692202

Sweet ride I have a 63 imp. My self I run independent valves they are faster than a manifold setup and you can mount then closer to the bag if you need more info let me know and I will tell you how I set mine up to give you a idea how to do you ride