UnitedRidaz Lowrider Forums - View Single Post - How do I plumb 2 scuba tanks for nitrogen

1lowcut · 03-24-2008, 02:58 PM

Free air.... wish i had that! The tank is rated at 150 but most air parts have a 4:1 burst rate so you could put upto 600 psi and then be pushing it. personaly i have ran about 550 for just a few hits and all the lines and fittings held just fine. when you get it all in there you will be able to see what you want to run at. start going over 350 and your air goes quick. Unless your gonna stay with the regulator you have and go at 145.

If you need anything just post up and we'll help you figure it out.

03-24-2008, 02:58 PM	#7 (permalink)
1lowcut AIR RIDE MODERATOR Join Date: Apr 2007 Location: Reno Posts: 780	Re: How do I plumb 2 scuba tanks for nitrogen Free air.... wish i had that! The tank is rated at 150 but most air parts have a 4:1 burst rate so you could put upto 600 psi and then be pushing it. personaly i have ran about 550 for just a few hits and all the lines and fittings held just fine. when you get it all in there you will be able to see what you want to run at. start going over 350 and your air goes quick. Unless your gonna stay with the regulator you have and go at 145. If you need anything just post up and we'll help you figure it out.