UnitedRidaz Lowrider Forums - View Single Post - How do I plumb 2 scuba tanks for nitrogen

1lowcut · 03-21-2008, 08:53 AM

Whats the cost of oxygen? Also I would look at trying to fing a regulator that will push more than 145 psi. I think you said you have RE bags so their rated at 200 PSI and i would run them on the daily at 225-250 and maybe 300-325 for play time. But again I'm speed happy and wouldnt put in a bag that was only rated at 200. I only roll HE's. I dont use the XS's because i would only run about 550PSI max and any more than that and the tanks go WAY to fast.

Personaly, to me you have allot of money in your car and shouild do it right with a notrogen bottle and regulator. Putting in two scuba tanks because you got them for free will bring down the appearance of the set up. One nitrogen tank will give you 150 cu.ft of 2500psi and you can even go bigger. Slam runs a 300 cu.ft, I wish i could but it wont fit in my trunk.

03-21-2008, 08:53 AM	#5 (permalink)
1lowcut AIR RIDE MODERATOR Join Date: Apr 2007 Location: Reno Posts: 778	Re: How do I plumb 2 scuba tanks for nitrogen Whats the cost of oxygen? Also I would look at trying to fing a regulator that will push more than 145 psi. I think you said you have RE bags so their rated at 200 PSI and i would run them on the daily at 225-250 and maybe 300-325 for play time. But again I'm speed happy and wouldnt put in a bag that was only rated at 200. I only roll HE's. I dont use the XS's because i would only run about 550PSI max and any more than that and the tanks go WAY to fast. Personaly, to me you have allot of money in your car and shouild do it right with a notrogen bottle and regulator. Putting in two scuba tanks because you got them for free will bring down the appearance of the set up. One nitrogen tank will give you 150 cu.ft of 2500psi and you can even go bigger. Slam runs a 300 cu.ft, I wish i could but it wont fit in my trunk.