[SLAMMED63CHEVY]

Originally Posted by blown64

I bought the FBSS kit from VT Kustoms for a 64 Impala ,which comes with the GC Xtreme 350 valves, Viair 325 air compressor ,5 gal 4 port tank rated at 200 PSI ,Slam Specialties RE bags.So with the 4 port tank ,I have 2 ports used for the front and rear setup and 1 for the air pump and the other for the air pressure check valve. Whats the best way to run the 2 lines to the front ,like in slams 63? Use a T fitting where the check valve goes?

Okay, I have the same setup as you with the same tank. 2-ports are used for the front 1-post split for the rear 1-port split for the compressors and nitrogen and one port for your pressure switch.