Quote:
Originally Posted by pcp
so what I need are
-2 pump set-up (I'll probably buy them at prohopper once they start answering my e-mails and if they don't get to me by end of November then I'll go with blackmagic.
-balljoints from napa
- extend the trailing arms
-I ordered a set of 14x7 rev
Is that all I need?
|
If you want prohopper order everything at once and call them up and talk to armin. if you order alot you can usually get a better deal so its best get everything at once
My Vote--If you can wait till dec or jan blackmagic usually has some real good deals
make sure you get the lifetime warrantied balljoints cost around $30 ea.
Extend the front a-arms 3/4 to 1 in. if you are running 14's or bigger get dropmounts made and/or extendable trailing arms (dont have to reinforce these save yourself some time)
run 13x7 unless you are deadset on 14's
I believe yours is a g-body and you can use the 88 caprice a-arms with a little modification and they are extended almost 1" already