not to be a know it all or nothin but if u spray with the enamel heres what u do
step 1 = mix the paint and spray it in fog coats till u get full coverage of the car/truck not to much it does not have to be all shinny just yet ......
step 2 = go to ur local paint and body supply house and get you 2 cans of bulldog adhesive promoter
step 3 = now take the adhesive and just fog the entire car,, this prevents fish eyes when u apply the clear
step 4 = get you a quart of innercoat clear to flake with it works better and cheaper than mixin the flake in the clear lol trust me been there done that......lol mix your flake and fog the car till you are happy with the amount of flake on there
step 5 = no more flake its clear time , if it was me and u want a good finish go over the car and clear it like 4 or 5 times with the 5th coat being your wet coat allow to dry
step 6 = wet sand with 1500 or 2000 grit sandpaper untill happy ithe the finish the buff out with some medium grit compound and then buff with a polishing compound then u r ready
just my 2 cents i hope it helps you later
|