[SLAMMED63CHEVY]

How fast do you want to lift and lower your ride?
If you want a fast lift I recommend running ½ inch everything. Because if you want to slow down a fast setup you put in fill controllers.
If you buy a slow setup and you want to make it faster then you will need to replace you valve, line, fittings along with some other thing and that gets expensive.
I would run at least a five gallon tank.
The Viair500 is a good compressor a lot of people run two of them
A pressure switch and a relay is a good idea to have in any air setup. I run an 80amp relay and my pressure switch is not wired up but I run nitrogen most of the time.
600psi Slam bags are very good bag but might be overkill if you are only running a 150psi setup. 1lowcut and my self run are setups at over 250psi.
You don’t need side to side but you might want to control each bag to help keep the car level along with front switch and back switch for a total of six switches two for controlling front and back and four to control each bag reason for this is you can level the car if one side fills faster then the other. Some times I hit my front switch and my left front bag will fill faster then the right front and if I want a soft ride I need to tap the front right switch to level the car.

You will need

• 1 tank
• 4 bags
• 8 valves
• 6 switches
• 1 pressure switch
• 1 relay
• 1 or 2 compressior
• Air Line
• Fittings
• Bag Brackets
• Mounting Hardware (nuts and bolts)

If you need more help just let me know