[hotrods316]

So whats happening is the fitting flanges bottoms out on the top of the bag. the bags must be tapped too deep because no fittings screw down that far. I have used PTC and they leaked a little around the line so the ones i have now are DOT comprression. No it leaks as soon as any air hits it and I MEAN LEAKS. The car is down in like 3 mins. I have the bags set up like air shocks right now, no valves or anything, i just an air compressor to fill them up. I built a jig to hold the bag so i can find leaks before i put it on the car. Thought that was a good idea. If the silicone doesnt seal I am going to get cheap PTC fittings and then epoxy them in. I deal with polymers and my boss said it should work or if not acetone will eat the epoxy to get the fittings out. I just wanna ride on air because i set it up to be LOW!!!!! and it is. i tuck half of my wheel and they are 15" on medium tires. I hope to GOD that the silicone works, if not i will get a ttiny piece of pipe cut and threaded and then put a fem-fem connector or something. Alright there is my situation if you have any ideas or ?'s let me know. Thanks Matt