View Single Post
Old 04-06-2007, 06:01 PM   #7 (permalink)
SLAMMED63CHEVY
AIR RIDE MODERATOR
 
SLAMMED63CHEVY's Avatar
 
Join Date: Apr 2007
Location: Reno, NV
Posts: 1,314
Send a message via AIM to SLAMMED63CHEVY
Re: Panhard bar on air setups

Quote:
Originally Posted by JUSWESTCOASTIN View Post
ive seen the waats on a 64 bel air, so they should be able to hook you up with some kind of info, if i can ask what brand air set up are you runnin, and does the nitro tank help it get up quicker?
I called totally polished and they said they can cook me up with a watts link but the most travel I can get is 20 inch now I have not check how much travel I have yet but if it is under 20 inch then I will go with one
My air setup runs mostly off of nitrogen but I still have compressors so if I run out of nitrogen I’m not stuck on the ground the air flow and PSI help you get up faster the more air flow and PSI the faster you are most compressors only run at 200 PSI so for more PSI you go with nitrogen from 0 PSI -100 PSI most compressor have 100% duty cycle 100 PSI– 200 PSI most compressors can only run 8 out of 10 minutes I think that is a 80% duty cycle not to sure 150 bottle of nitrogen has around 2000 PSI and you use a regulator for what ever PSI you want to run at my regulator goes from 0 – 1000 PSI so I set it at 300 PSI and with one hit of the switch the front of my 63 will hop about 6 inch the cool thing about nitrogen is from 0 – 300 PSI it fills my five gallon tank in seconds a compressor will take what 10 minutes I just got some slam bags and my setup is all ½ inch line, valve, bags I did not buy a kit I pieced it together but I have seen some good kits on the net.
SLAMMED63CHEVY is offline   Reply With Quote