Thread: Power Acoustik
View Single Post
Old 11-11-2006, 01:33 PM   #1 (permalink)
bigharley
 
bigharley's Avatar
 
Join Date: Nov 2002
Location: Antioch,Ca
Posts: 450
Send a message via MSN to bigharley
Smile Power Acoustik

I don't care what any one says about PA being a flea market brand cheap speaker.
I am running two fubr 12's and one A2400DB power acoustik mono amp and i hit so hard people roll up their windows or run red lights when i roll up. my speakers are 1800 watts peak each and are wired in parallel so they get 1400watts RMS @2 ohms. Each speaker is gettin 700 watts RMS. both are in boxes to small one box is 1.2 cubic ft vented and the other is 2.0 cubic feet ported.
Both boxes should be no less than 2.2 cubic feet per sub. I have an SPL 3 farad cap and my lights still dim. but damn do i slap hard with any music i listen too metal , bass rap, hip hop etc. I made a custom amp rack so when the back seat is down you can see it, i am still runnin the stock deck and stock impala 6.5 components.I did change out my 6x9's for MB Quart DKK 169 6x9's.... WOW what a difference. i do have a Power Acoustik 600 watt 4 channel amp waiting in the lieu to replace the stock 200 watt 4 channel one and i have a pair of Infinity Reference 6.5 components waiting to be put in the front doors.
So many people ask me how many 15's or 18's am i runnin that it makes me laugh. i am quite happy with my Power Acoustik set up and just wanted to share it with people.

Last edited by bigharley; 12-18-2006 at 10:01 PM.
bigharley is online now   Reply With Quote