UnitedRidaz Lowrider Forums - View Single Post

juicedoutsoon · 08-15-2003, 10:39 PM

this is the drawing i drew lol please tell me if that look hundred percent correct???

let me explain this real quick don't have time to draw out 4 batts in seried to give 48v which is to power the pump motor and the 24v for the switches k........ this is how it would look like wit 1 pump 2 dump here it goes...........

Explanation: Okay in that pic is a round pump that says PF mean front pump and it has 2 dumps one for front left and one for front right....... each of the dump has 2 wires one is for power and other is for switches... then i drew out 2 noids for the pump and see how i ran the 48v from the batt to the side prong of the first soleniod and then i ran other wire to the next side prong on the same soleniod and so on then i ran it to the pump motor............ Now i drew out 2 switches wit 3 dots indicatin 3 prong or wateva, the front prong on the front switch went to the front left dump and then i jumped the power wire on middle prong to the next one on the switch then i ran another wire to the 24v batt......... then the 3rd prong on each switch went to one of the top prong on the switch..........

Is this correct??????

What i had problem was which last prong goes to which soleniod do i pick any or it goes in a certain order thanks guy.............

08-15-2003, 10:39 PM	#13 (permalink)
juicedoutsoon Registered User Join Date: Jun 2003 Posts: 19	this is the drawing i drew lol please tell me if that look hundred percent correct??? let me explain this real quick don't have time to draw out 4 batts in seried to give 48v which is to power the pump motor and the 24v for the switches k........ this is how it would look like wit 1 pump 2 dump here it goes........... Explanation: Okay in that pic is a round pump that says PF mean front pump and it has 2 dumps one for front left and one for front right....... each of the dump has 2 wires one is for power and other is for switches... then i drew out 2 noids for the pump and see how i ran the 48v from the batt to the side prong of the first soleniod and then i ran other wire to the next side prong on the same soleniod and so on then i ran it to the pump motor............ Now i drew out 2 switches wit 3 dots indicatin 3 prong or wateva, the front prong on the front switch went to the front left dump and then i jumped the power wire on middle prong to the next one on the switch then i ran another wire to the 24v batt......... then the 3rd prong on each switch went to one of the top prong on the switch.......... Is this correct?????? What i had problem was which last prong goes to which soleniod do i pick any or it goes in a certain order thanks guy............. Last edited by juicedoutsoon; 08-15-2003 at 10:56 PM.