Quote:
|
Originally Posted by juicedoutsoon
aw i just noticed i put up a bad topic name but anyways......
1. Aw nevermind i'll just use my prewired 10 switch switchbox, but rite now i'm havin a problem this switchbox has 9 wires and some peeps say if this is a 2 pump 4 dump setup its supposed to have 7, the guy who is givin me the switchbox say its was wired like this on his balser for a 2 pumper, 4 dump wire, 4 soleniods wire and one 24v wire peeps sayin no this is for a 4 pump, and some say yes so what i need help on this...........
2. Also who know where i can go to get the wiring diagram tellin u like what wire on the switchbox goes to what all i know is the red hot wire goes to 24v......... so its down to 8 lol...........
3. since this is gonna be a 2 pump 4 dump setup 4 batts wired in series givin me 48v can i use like a 4 guage wire for everything or what???
|
the problem with getting a diagram would be this where did the box come form originaly?
take good pics of the inside of the box ie back of the switches... dont assume the red wire is hot sometimes the violet wire is hit sometimes orange and sometime brown... u will have 2 extra wires that u wont need to use
u can use 4 gauge for the batts selenoids and to the motors on the pumps
take good pics of the back of the switches (still wired) and post them up or send them to me @
customlolo@yahoo.com
if i can i will try and figure out which wires are which based on the pictures if the pics are good it shouldnt be a problem