UnitedRidaz Lowrider Forums - View Single Post

Lowridingmike · 01-19-2003, 09:35 AM

Alot of people spray models and say that's it.... Well the truth is if you want a great looking and feeling model then you'll have to more then that! First please use at least 4 to 6 coats of clear coat. Then with about a 700 grit sandpaper and a bit of water sand the clear coat down until it's really smooth... After that let it dry. After it's dry the car will have like a white dust over it... To buff that out use an old dremel pad and a moist piece of towel paper attached to it. Then start buffing the car out ntil the whole car is done. After you're done your model should be mirror smooth and very glossy and shiny!

01-19-2003, 09:35 AM	#1 (permalink)
Lowridingmike Registered User Join Date: Jun 2002 Location: Chicago, Il Posts: 566	Wet Sanding Alot of people spray models and say that's it.... Well the truth is if you want a great looking and feeling model then you'll have to more then that! First please use at least 4 to 6 coats of clear coat. Then with about a 700 grit sandpaper and a bit of water sand the clear coat down until it's really smooth... After that let it dry. After it's dry the car will have like a white dust over it... To buff that out use an old dremel pad and a moist piece of towel paper attached to it. Then start buffing the car out ntil the whole car is done. After you're done your model should be mirror smooth and very glossy and shiny!